How to make your own concrete

how to make your own concrete

Little Succers Has Opened a Permanent Succulent Studio and Build-Your-Own Terrarium Bar

Mar 05,  · Elegant, customized garden decor doesn't have to cost a fortune. You can create your own instead with concrete, which is durable, inexpensive, and easy to work with. One of the simplest projects to DIY is a pretty finished, the foliage and bright blooms of your plants create vivid contrast with the textured gray container. Nov 05,  · To make your own concrete from limestone cement, mix 2 parts all-purpose sand to 1 part cement in a wheelbarrow with a shovel or in a cement mixture. Mix in 4 parts of gravel or crushed brick to the mixture, then slowly add water into the dry ingredients.

The short answer is yes. They have held up amazingly well with lots of daily traffic and probably not cleaned enough. I am so glad we choose this method, because I still love the fact that I got exactly what I wanted on an itty bitty budget. We pre-drilled the holes, to prevent splinters and splitting. Then we used wood screws, attaching it straight to the sub-floors.

We thought about using pin nails, but decided that the exposed nail heads were our favorite part of old farm house floors. Gina Luker is a writer, photographer and lover of all things quirky. She's usually found with a drill in one hand and a cocktail in the other while blogging along the way. She's addicted to coffee, polka dots, rock stars, Instagramand everything aqua.

I am not sure Verna, you might check with a professional on that, we had a subfloor that how long to cook a 25 pound turkey stuffed a plywood type flooring. I think how to make your own concrete can do it on concrete.

You would just have to glue the planks down our use a hammer drill to screw into concrete. Yes you can do this on concrete. I actually glued them down with a wood floor glue from Home Depot. I stained them mahogany and just love them. I love your floors, I need a new kitchen and living room floor and I really want to do this. You are so smart! I know you probably plan on staying in that house forever, but would you recommend this method for how to make your own concrete who might move someday?

It seems pretty permanent…. I would think any wood floor is fairly permanent, so should not affect value if you do a quality job. Hope this is helpful :. This is a great project. It reminds me a little of the plywood floor project over at Quarry Orchard. Wow, those are amazing floors! And on such a great budget.

I love these, and your ingenuity! They how to make carbonated soda have that old, timeworn, farm house feel.

Great job! This is a terrific idea and you are very fortunate to have such what vegetables go with prawns handy husband! Do you think this method would work for painted floors, as well as stained floors?

I think the paint would wear more, but I would like the imperfection of it. You could paint with Milk paint. It absorbs fully into the raw wood and is almost impossible to remove.

You can also use milk paint mixed how to make your own concrete as a coloured stain as well. Then you could seal with a poly coat or with hemp oil or tung oil. I love this!

What an awesome idea. They turned out looking great. Your floors how to remove gummy labels amazing!

I love how unconventional, yet beautiful they are! What a great idea! Thanks for sharing. Top it off with 3 coats of poly and it should withstand daily traffic. Hope this helps! I love these floors!! Great floor DIY! I wanted darker, but my builder and the flooring people sort of manipulated me out of it.

Great post! I did this in my kitchen and LOVE it! I linked this to my hardwood floors post too, well done! After laying the floors down and screwing them how to make your own concrete, did you have to sand the surface to make sure the boards were even with one another? I absolutely love the look of your floors, and this is similar to what I really really want in there! I have commented twice about questions concerning the fact that a simple butt joint between the boards is NOT a good idea as seasonal expansion and contraction of the wood will cause cracks to open up which will trap dirt.

This is why wood flooring is made with a tongue and groove joint to accommodate for this movement. You are doing your readers a disservice by not mentioning this. Many people may choose to proceed with your style of installation anyway as the savings is considerable, but they should be made aware of the drawbacks.

Very, VERY disturbing. Tongue and groove is still a butt joint. Some even space every row when using DIY plank or plywood. One last aesthetic pro detail is to not align every other plank end when staggering. Thanks for posting my comment, Gina. Your tutorial gives an inexpensive option for flooring that many people will undoubtedly choose, even knowing the potential drawbacks, but they should be aware.

Nothing wrong as long as full disclosure is made. I love how you handled this commenter. I think dirt is a part of owning this style of floor. For me that is what I love about it; dirt friendly!! I have an old dog, a new to what is apex class in salesforce home that is older with no landscape.

Tearing out my carpet and laying this down will accommodate my situation. My loveable, old dog can track in all the dirt he can carry and I will no longer concern myself with it…. Do you have to stain the wood or can it be left natural color??? Can you do all the sanding, and varnishing of each board before you start nailing it down??? How much space did you leave between the boards? Do you have to put the wood inside for a period of time like you do with typical wood flooring before installation?

I love your floors! I have wanted wood floors in my home forever and have searched for ideas on how to do it ourselves, and this is it! Thank you.

I was considering it as well, but then there is the time consuming venture of cutting each piece. Your idea is much more appealing. Thank you for sharing your ideas with us, what you do is appreciated! We have a bar in the basement and we are in the process of redoing it. But have you ever tried it on a basement floor? Thanks for your advice, my husband and I just installed pine wood floors in our heaviest traveled room see if it holds up.

Also, thank you heaps for the suggestion to go to a sawmill! Howell crakersawmill. Same price as plank, and cheaper than the big box stores! Your blog is very helpful. I have a tiled floor where i would like to do this.

I Am so doing this!!! Question- did you have a lot of issues with the boards not being straight and then throwing off the flow of how to make your own concrete boards? The lumber guy has me a bit freaked about that. I recently came across your blog and did this floor in an older house and it turned out awesome!

I also used Minwax polyurethane fast drying for floor in a clear satin and what is private employment agency the planks a little with different items. Everyone that sees this loves it!! Thank you for the blog!! Ohhh, I would love to see a picture of that!!! Thanks for your great ideas and for this awesome blog! But then I noticed something on this article. Please correct my math.

I think he paid 3 or 4 dollars per stud.

Top Navigation

Mar 28,  · Make the forms you need to use for the concrete bricks. This requires basic carpenter tools and a sheet ofinch (19 mm) plywood along with 2 x 4-inch ( x cm) by 8 feet ( m) lumber. Use 9 x 4 x inches ( x x cm) for your brick dimensions. How To: Make Concrete Countertops Concrete is a striking and practical choice for countertops, made from a DIY-friendly materials that enables any confident homeowner to achieve quality results. To make a rubber mold, the rubber can be poured against a well-sealed model or brushed or sprayed on to the model to create a mold for using in your countertop. "We generally recommend poured block molds for concrete," said David Salisbury, president of Polytek.

Last Updated: November 5, References Approved. This article was co-authored by Gerber Ortiz-Vega. Gerber specializes in providing brick and stone laying services, concrete installations, and masonry repairs. Gerber has over four years of experience running GO Masonry and over ten years of general masonry work experience.

There are 15 references cited in this article, which can be found at the bottom of the page. This article has 14 testimonials from our readers, earning it our reader-approved status. This article has been viewed 1,, times.

Concrete is a building material that's comprised of fine and coarse materials bound together with cement. If you need to do improvements on your home, you may want to make some concrete yourself. Alternatively, you can purchase pre-mixed concrete and add water to create workable concrete.

Regardless of what you decide to do, creating concrete is easy as long as you have the right materials and tools. To make your own concrete from limestone cement, mix 2 parts all-purpose sand to 1 part cement in a wheelbarrow with a shovel or in a cement mixture.

Mix in 4 parts of gravel or crushed brick to the mixture, then slowly add water into the dry ingredients. Keep reading for tips from our contracting reviewer on how to make your own limestone cement! Did this summary help you? Yes No. Log in Social login does not work in incognito and private browsers. Please log in with your username or email to continue. No account yet? Create an account. Edit this Article.

We use cookies to make wikiHow great. By using our site, you agree to our cookie policy. Cookie Settings. Learn why people trust wikiHow. Download Article Explore this Article parts.

Things You'll Need. Related Articles. Article Summary. Part 1 of Crush limestone into 3-inch 7. Purchase or find limestone on your property and crush it up into small, 3-inch 7. You can tell if the stone is limestone if it fizzles or cracks when you put vinegar on it.

You can also buy limestone-based Portland cement online, at hardware stores, or at home and gardening centers instead of making it yourself. Preheat the kiln and put your limestone into it.

Use a high-temperature kiln thermometer to determine the level of heat in the kiln. Make sure to wear a respirator and goggles when heating the limestone because it will let off a harmful gas.

Crumble up the pieces of heated limestone once it cools. Let the limestone cool for an hour or two before handling it. Point a fan towards the stone to speed up the cooling process. Wear thick rubber gloves when handling the limestone. Transport the limestone to a wheelbarrow and then use a shovel to break up the limestone pieces until it turns into a fine dust. Part 2 of Mix two parts all-purpose sand to one part of cement. Mix either fine or coarse all-purpose sand with the cement in a wheelbarrow with a shovel.

You can buy all-purpose sand online or at a hardware store. If you have access to a concrete mixer, you can use that instead of a shovel and wheelbarrow.

Add two parts of sand for every one part of cement dust that you have and make sure that they are well incorporated. Add four parts of gravel or crushed brick to the mixture. Add four parts of gravel or crushed brick for every one part of cement. This coarse material will help bind the concrete together once it dries. If you want a smoother concrete finish, you should use smaller pieces of gravel or crushed brick.

Continue to mix all the dry ingredients together to create your concrete mixture. Slowly add water to the dry ingredients. Fill a 5-gallon Mix the cement together. Use a hoe or a shovel to mix the water and dry concrete mixture together. If the concrete is still dry and crumbly, you need to add more water. Wash off your mixing tools. Use a hose on the strongest setting to spray your tools and blast away any remaining concrete before it sets.

If there's anything left after you spray, use a wire brush to remove the last bits. Part 3 of Purchase a bag of pre-mixed concrete. You can get pre-mixed concrete at home centers, lumberyards, and at hardware stores. Once you get the concrete, read the directions on the back of the bag so that you know how much water you need to mix with the concrete dust.

Empty the bag of concrete in a wheelbarrow. Place the bag of concrete into a wheelbarrow and use a hoe or a shovel to cut the bag in half. Lift off both sides of the bag and empty out the contents into the wheelbarrow.

Instead of a wheelbarrow, you could use a concrete tray. Slowly add water to the concrete mix. Fill up a bucket with the amount of water that you need according to the instructions on the back of the bag.

Slowly pour the water into the mix. You can always add more, but you can't take away what you've already put in. Mix the concrete together.

Work out any lumps until the concrete is as smooth as possible. Clean off your mixing tools. It will be harder to remove the concrete once it dries.

How many parts of water should I use with one part cement, and two or three parts of fine sand? Use 2 parts water, that way the final mixture isn't too grainy or over-watered. Not Helpful 6 Helpful Quick-Crete is pre-mixed concrete and is strong enough to hold up a mailbox post.

Not Helpful 4 Helpful It depends on the brands or products you buy. Unless you state the brands you are going to use, nobody can give a exact answer, but an estimate should be available. Not Helpful 15 Helpful Limestone helps bind the cement with the sand and gravel.

Without it, your cement wouldn't bind together well. Not Helpful 7 Helpful No, sand and gravel should be adequate but adding it will improve stability and sturdiness of the concrete once set. Not Helpful 18 Helpful Gravel, gypsum and water always make a great pour, but adding a bit of tar will make it better for hot climes. Not Helpful 10 Helpful 6. When the article talks about "parts" eg. By volume, so one bag cement for the bags of sand if they are all the same size.

Not Helpful 5 Helpful 0. Edgar Mbui. You will need to wet the set concrete first before pouring new concrete, which help bond the two mixtures. Not Helpful 2 Helpful 2. Include your email address to get a message when this question is answered.

4 thoughts on “How to make your own concrete

  1. That far I would have loved to read you much more, to be able to realise more what your youth leaves in your emotional body

Add a comment

Your email will not be published. Required fields are marked *